Accessories coal forges

1 From 3
No results were found for the filter!
Windschirm zum Aufstecken wind guard
  for portable forge F 600 and F 620 made from stainless steel
€32.00 *
Lenkrollen zum Anschrauben für Feldschmieden set of rolls
  for portable forgesset with 4 pieces, 2 with brake_x005F_x000D_
€55.00 *
Lederflachriemen #Varinfo leather flat belt
  for foot operated portable forges or orther applicationsthickness about 4 mm, length on request (price in EUR/cm)
Content 0.01 meter (€14.00 * / 1 meter)
From €0.14 *
Montage Lederflachriemen und Schließklammer Mounting leather flat belt and belt buckle
  we assemble for you the leather flat belt and belt buckles individually according to your length specification. So you can be sure that...
€8.00 *
Anschlussbox 400V/3-ph für Schmiedeherd Blacksmith forge plug in mounted
  Ready to plug in for connection with an extension cable CEE, Housing IP54 protected, with ON / OFF switch, CEE plug 16 A with phase...
€114.00 *
Druckluftanschluss für Feldschmiede F 600 P compressed air connection for portable forge F...
  with valve and with debit regulation valve, to be fitted to the hearth sole instead of the ventilator
€92.00 *
Druckluftanschluss für Schmiedeherd compressed air connection
  with valve with debit regulation valve, to be fitted to the hearth sole instead of the ventilator
€92.00 *
Luftanschluss nach hinten tube conection rear side
  for EE-2 ... EE-7, diameter of the inlet Ø 50 mm,
€60.00 *
Feuerbegrenzungen Typ B 1A fire limitations type B 1A
  pair of limitation elements to be set on the fire pan of the type C 10, height over the fire pan 50 mm
€115.00 *
Feuerbegrenzungen Typ B 1C fire limitations type B 1C
  pair of limitation elements to be set on the fire pan of the type C 10, height over the fire pan 90 mm
€220.00 *
Feuerbegrenzungen Typ B 15 fire limitations type B 15
  pair of limitation elements to be set on the fire pan of the type C 15, height over the fire pan 130 mm
€256.00 *
Schlauchstutzen Typ 0-50 hose connection type 0-50
  with 1 outlet dia. 50 mm for blowers type RD-0 and RE-0, to connect the alu-hose, with clip, bolts und nuts
€24.00 *
Schlauchstutzen Typ 1-50 hose connection type 1-50
  with 1 outlet dia. 50 mm for blowers type RD-10 and RE-10 and SV370, to connect the alu-hose, with clip, bolts und nuts
€26.00 *
Schlauchstutzen Typ 1-50-50 hose connection type 1-50-50
  with 2 outlets dia. 50 mm for blowers type RD-10 and RE-10, to connect the alu-hose, with clips, bolts und nuts
€35.00 *
Schlauchstutzen Typ 2-50-50 hose connection type 2-50-50
  with 2 outlets dia. 50 mm for blowers type RD-2, to connect the alu-hose, with clips, bolts und nuts
€38.00 *
Schlauchstutzen Typ 2-3-50 hose connection type 2-3-50
  with 3 outlets dia. 50 mm for blowers type RD-2, to connect the alu-hose, with clips, bolts und nuts
€50.00 *
Schlauchstutzen Typ 2-4-50 hose connection type 2-4-50
  for blowers type RD-2, with 4 outlets dia. 50 mm to connect the alu-hose, with clips, bolts und nuts
€62.00 *
Drosselklappe druckseitig Typ 0 Throttle valve type 0
  inner dia. ø 46 mm for blowers type RD-0 and RE-0, for fitting on the blower discharge flange, bolt circle diameter 75 mm
€57.00 *
Drosselklappe druckseitig Typ 10 Throttle valve type 10
  inner dia. 65 mm for blowers type RD-10 and RE-10, for fitting on the blower discharge flange bolt circle diameter 95 mm
€74.30 *
Drosselklappe druckseitig Typ 2 Throttle valve type 2
  inner dia. 100 mm for blower type RD-2, for fitting on the blower discharge flange, bolt circle diameter 139 mm
€98.00 *
1 From 3
Viewed