Due to legal requirements (Corona), direct sales on site in Reinstetten are not possible at the moment. - shipping by parcel service continues without problems.

Spring hammers

No results were found for the filter!
Schwingungsdämpfungsmatte 450x80x25 mm damping mat 450x80x25 mm
  for airhammer to be glued with polyurethane solution adhesive under the steel base.
€43.90 *
Schwingungsdämpfungsmatte 510x150x25 mm damping mat 510x150x25 mm
  for airhammer to be glued with polyurethane solution adhesive under the steel base.
€87.00 *
Schwingungsdämpfungsmatte 620x150x25 mm damping mat 620x150x25 mm
  for airhammer to be glued with polyurethane solution adhesive under the steel base.
€98.00 *
Schwingungsdämpfungsmatte 700x150x25 mm damping mat 700x150x25 mm
  for airhammer to be glued with polyurethane solution adhesive under the steel base.   Up to 4 damping mats are required for a...
€114.00 *
Flachgesenk (kurz) oben für Federhammer Meitinger flat die (short) top part for spring hammer
  type Meitinger Rationell or Record Dimension 60x60 mm, height approx. 90 mm, made from steel C65, hardened
€215.00 *
Flachgesenk oben für Federhammer Meitinger flat die top part for spring hammer
  type Meitinger Rationell or Record 80x60 mm, height approx. 150 mm, steel C65, hardened,
€220.00 *
Flachgesenk unten für Federhammer Meitinger flat die bottom part for spring hammer
  type Meitinger Rationell or Record steel C65, hardened,
€215.00 *
Recksattel oben für Federhammer Meitinger fullering die top part for spring hammer
  type Meitinger Rationell or Record steel C65, hardened,
€220.00 *
Recksattel unten für Federhammer Meitinger fullering die bottom part for spring hammer
  type Meitinger Rationell or Record steel C65, hardened,
€220.00 *
Kombigesenk oben für Federhammer Meitinger combination die top part for spring hammer
  type Meitinger Rationell or Record steel C65, hardened, drawing die and flat die.
€260.00 *
Kombigesenk unten für Federhammer Meitinger combination die bottom part for spring hammer
  type Meitinger Rationell or Record steel C65, hardened, drawing die and flat die.
€260.00 *
Kombigesenk oben für Federhammer Meitinger combination die top part for spring hammer
  type Meitinger Rationell or Record steel C65, hardened, flat die and fullering die (R=75 mm)
€260.00 *
Kombigesenk unten für Federhammer Meitinger combination die bottom part for spring hammer
  type Meitinger Rationell or Record steel C65, hardened, flat die and fullering die (R=75 mm)
€260.00 *
Krongesenk oben für Federhammer Meitinger crown die top part for spring hammer
  type Meitinger Rationell or Record steel C65, hardened, convex on both directions.
€260.00 *
Krongesenk unten für Federhammer Meitinger crown die bottom part for spring hammer
  type Meitinger Rationell or Record steel C65, hardened, convex on both directions.
€260.00 *
Keil für Untergesenk Federhammer Meitinger wedge for bottom die for spring hammer Meitinger
  type Rationell or Record two pieces needed
€13.90 *
Keil für Obergesenk Federhammer Meitinger wedge for top die for spring hammer Meitinger
  type Rationell or Record one piece needed
€13.90 *
Gegenpufferlager Spring support
  for setting up air hammer or spring hammer, 60 Shore, OD 47 mm, ID ~ 17 mm
€11.79 *
Viewed