Due to legal requirements (Corona), direct sales on site in Reinstetten are not possible at the moment. - shipping by parcel service continues without problems.

Miscellaneous

1 From 2
No results were found for the filter!
Haueisen, rechts Cutting tool, right
  for right hand cutting very low hight, suitable for power hammers, handforged, height 30 mm, length 400 mm
€53.00 *
Haueisen, links Cutting tool, left
  for left hand cutting very low hight, suitable for power hammers, handforged, height 30 mm, length 400 mm.
€53.00 *
Balleisen, Radius 5 mm, längs fullering tool, radius 5 mm
  handforged of one piece of steel very low height, suitable for power hammers, height 25 mm, length 400 mm
€53.00 *
Balleisen, Radius 9 mm, längs fullering tool, radius 9 mm
  handforged of one piece of steel, very low height, suitable for power hammers, height 25 mm, length 400 mm
€59.00 *
Dreikanteisen cutting tool, triangular
  symmetric, for cutting very low hight, suitable for power hammers, handforged of one piece of steel, height 15 mm, length 400 mm
€53.00 *
Legeeisen hohlballig 9 mm quer fullering tool
  handforged very low hight, suitable for power hammers, height 40 mm, length 350 mm
€65.00 *
Legeeisen doppelballig 9 mm quer fullering tool, double, 9 mm
  handforged very low hight, suitable for power hammers, height 40 mm, length 350 mm
€65.00 *
Schmiedeklemme rund 8 und 10 mm fullering tool 8 + 10
  spring swage design, handforged very low hight, suitable for power hammers, height 50 mm, length ~ 400 mm
€125.00 *
Handgeschmiedeter Nagel 6 mm Handforged nail
  tetragonal, tapered, head diameter approx. 18 mm, total length ~ 100 mm
From €3.00 *
Nageleisen 6 mm, kompakt Nail header
  with shaft 25 mm for the square hole of the anvil, or for fixing in the vice. For easy making of the nail head. with groove for...
€68.00 *
Hint!
Farbtafel Anlass- und Glühfarben Temper colours table
  printed on high quality paper, dimensions DIN A5 (14,8 x 21 cm)
€1.00 *
Hint!
Eisen-Kohlenstoff-Diagramm Iron-carbon diagram
  with detailed explanation. Printed on high quality paper, dimensions DIN A5 (14,8 x 21 cm).
€1.00 *
Schlossnagel geschmiedet 20 mm, gebläut Forged nail
  tetragonal, tapered Headdiameter ~ 8,5 mm, shank ~ 2,3 mm   in packs with 1 kg (is equivalent to ~ 1000 pcs)
Content 1 kilogramme
€28.50 *
Brettnagel geschmiedet 60 mm, gebläut Forged nail
  tetragonal, tapered Headdiameter ~ 12 mm, shank ~ 3,2 mm   in packs with 2 kg (is equivalent to ~ 500 pcs)
Content 2 kilogramme (€24.95 * / 1 kilogramme)
€49.90 *
Torbandnagel 100 mm, geschmiedet forged nail 100 mm
  tetragonal, tapered Headdiameter ~ 18 mm, shank ~ 6 mm   in packs with 2 kg (is equivalent to ~ 90 pcs)
Content 2 kilogramme (€19.95 * / 1 kilogramme)
€39.90 *
Ankernagel 80 mm, geschmiedet forged nail 80 mm
  tetragonal, tapered Headdiameter ~ 20 mm, shank ~ 6,4 mm   in packs with 2 kg (is equivalent to ~ 90 pcs)
Content 2 kilogramme (€19.95 * / 1 kilogramme)
€39.90 *
Halbrundniete 2 x 10 mm Round head rivet
  DIN 660, RSt 36-2 (steel) 1000/box
From €18.00 *
Senkkopfniete 8 x 40 mm Counter sunk rivet
  DIN 661 100/box
From €52.90 *
Klingenrohling 75 aus Damaststahl knife blank from damascus steel 75 mm
  ~ 75x20x3-3,5mm a quality product of the Balbach damascus forge
€39.90 *
Klingenrohling 85 aus Damaststahl knife blank from damascus steel 85 mm
  ~ 85 x 24,5 x 3-3,5 mm a quality product of the Balbach damascus forge
€59.00 *
1 From 2
Viewed