grinding and sharpening

2 From 3
No results were found for the filter!
Vorrichtung für Äxte für NTS 255 Holding device for axe for NTS 255
  Holding device for axes with a cutting edge length of up to 170 mm
€29.00 *
Vorrichtung für Scheren für NTS 255 Holding device for scissors for NTS 255
  Holding device for straight scissors and hedge trimmers
€63.00 *
Vorrichtung für Röhren und Hohleisen für NTS 255 Device for for tubes and gouge for NTS 255
  Holding device for oblique cutting, tubes and plane iron
€64.00 *
Abdrehvorrichtung für NTS 255 Dressers for NTS 255
  For dressing abrasive stones with ultra-hard dressing diamonds
€59.00 *
Ersatzschneide für Abdrehvorrichtung für NTS 255 Spare cutting edge for twisting device for NTS 255
€36.00 *
Universalschleifvorrichtung für NTS 255 Universal sander for NTS 255
  Practical holding device for many straight standard tools
€39.00 *
Universal-Schleifstütze für NTS 255 Universal Tool Rest for NTS 255
  Extension to Universal sander USV-NSS,For tools that can not be easily clamped.
€34.00 *
Hobelmesserschleifvorrichtung für NTS 255 Planer knife sharpening device for NTS 255
  for planer knives up to approx. 400 mm in length
€449.00 *
Steinpräparierer für NTS 255 Stone Grader for NTS 255
  To increase the grain for particularly fine cuts with one side,To roughen again with the other side.
€28.00 *
Lederabziehscheibe profiliert für NTS 255 Leather honing disc profiled for NTS 255
  For removing the insides of rotating tubes and goat feet,Diameter 100 mm.
€85.00 *
Lederabziehscheibe für NTS 255 Leather honing wheel for NTS 255
  for removing grinding burrs after sharpening,Diameter 200mm
€98.00 *
Abziehpaste peeling paste
  For polishing the workpiece after grinding,75ml
€18.00 *
Schleifstein für NTS 255 Sharpening stone for NTS 255
  Ø 250 x 50 x 12 mm,Aluminum oxide, K 220
€98.00 *
Winkellehre für Schleifstein Ø250mm Angle gauge for grindstone Ø250mm
  to determine the right grinding angle for your tools,for use with sharpening stones with a diameter of 250 mm
€14.80 *
Stützteller Ø125 mm Back-Up-Pad disk fibre disc Ø125 mm
  with thread mount M14 and 5/8",suitable for fiber disc Cubitron,with clamping nut for fiber discs
€24.95 *
Fiberscheibe Cubitron® Korn #Varinfo Fiber disc Cubitron® grain
  982C Cubitron II fiber discØ 125 mm
From €3.20 *
Schleifband Cubitron für Radiusmaster, Korn #Varinfo Abrasive belt Cubitron for RadiusMaster, grain
  50x1220 mm
From €12.90 *
Schleifband für Radiusmaster, Korn #Varinfo Abrasive belt for RadiusMaster, grain
  50x1220 mm
From €4.00 *
Schleifband "Pro" Set - Radiusmaster Abrasive belt Set "Professional" - Radiusmaster
  consist of:10x grain 4010x grain 6010x grain 8010x grain 12010x grain 1805x grain 2403x grain 4003x grain 800
€219.00 * €256.92 *
previously €256.92*
Hint!
Schleifband "Starter" Set - Radiusmaster Abrasive belt "Beginner" Set - Radiusmaster
  consist of:2x grain 402x grain 602x grain 802x grain 1202x grain 1802x grain 2401x grain 4001x grain 800
€49.00 * €59.38 *
previously €59.38*
2 From 3
Viewed