No results were found for the filter!
special moulding sand, oil-bonded, 5 kg in plastic bucket
Content 5 kilogramme (€3.57 * / 1 kilogramme)
€17.85 *
Regenerating Oil for moulding sand for reworking of oil molding sand
Content 0.5 kilogramme (€36.00 * / 1 kilogramme)
From €18.00 *
Talc powder, 500 g powder 500 gFine talc to form the separating layer of the mold between the bottom and cope.
€7.00 *
special granulate for Al-Si-cast-alloys easy binding of oxids in the slagAddition quantity approx. 0.1%.
€9.00 *
Sieve ø 380 mm for sieving moulding sand,frame reinforced made of galavanized steel,extra strong iron wire, mesh size 3 mm
€49.00 *
Die Metallgiesswerkstatt author: Volker Allexisecond revised issue with 224 pages, softcover, dimension 14,8 x 21 cm~ 200 images and sketches
€29.90 *
Stahl-Metallurgie author: John D. Verhoeven320 pages, hardcover, dimension 15,5 x 23 cma lot of images, tables and sketches
€39.90 *
La métallurgie artisanale author: Séry, Mayn/ Moretti, Christian150 pages, hardcover, dimension 21,5 x 30 cm
€49.90 *
brass CuZn21Si3P cuboid 65x65x25 mm CuZn21Si3P cuboidDimension approx. 70 x 70 x 25 mmlead-free (max. 0,02 % Pb), good corrosion resistance and machinability,perfect for...
Content 0.98 kilogramme (€23.47 * / 1 kilogramme)
€23.00 *
ECOCAST ® brass Wieland-SW3, CuZn21Si3ECOCAST ® brass is sold in bars with about 11 kg
Content 11.9 kilogramme (€19.50 * / 1 kilogramme)
€232.10 *
Propane regulator 0,5 - 4 bar 12 kg/h, combi /3/8"LH,with pressure gauge and excess flow device, 35° angled
€63.00 *
heat protection mittens made from Kevlar® / Paraaramidup to 500 °C contact heat, very resistant, usable on both sides,approx. 30cm total length
€25.00 *
Heat protection gloves 3 fingers made from Aramid®,Contact heat up to 500 °C,4 layer construction,extremely good heat insulation on the palms of the hands,very...
€89.00 *
heat protection mittens 5 Finger made of 100% meta para aramid,excellent heat protection,up to 350 °C contact heat,usable on both sides,size 10
€16.90 *
protective armsleeve ca. 35 cm lang, gelb, atmungsaktiv,Schnittlevel 3, Kontakthitzelevel 1Kategorie II EN 388:2016 Level 133XB EN 407 Level X1XXXX
€16.90 *
cuffs for foundries aus 100% Aramid (ca. 475 g/m²) mit Hochvakuum - Metallisierung,Länge ca. 43 cmEN ISO 11612, Standard A1/B1/C3/D3/E3/F1
€96.00 *
Viewed