Products from ANGELE GMBH

ANGELE GmbH
58 From 61
No results were found for the filter!
Schildkappe ANGELE Cap Angele
  Cap with adjustable Flexfit technology,openback with perfect comfort,fast drying and good moisture transport.
€21.00 *
Deko Miniatur Hammer Decoration Small Hammer
  geschmiedet aus Stahl,klassische Hammerform,mit Holzstiel
€9.00 * €14.90 *
previously €14.90*
Schmiede Handwerker Bier 3 x 0,33 l Beer
  1 x 0,33 l
Content 0.33 litre (€4.55 * / 1 litre)
From €1.50 * €1.70 *
previously €1.70*
Ersatzmotor Rauchabzugsventilator Electric motor smoke extractor
  1400 r.p.m.,400Volt/ 3-ph, 50 Hz, 0,25 kW, for smoke aspirations A-15/ G-15
From €243.00 *
Wechselrichter 300W DC/AC Inverter module 300W DC/AC
  for portable forges with 230V for operation via 12V battery or 12V electrical car system.
€69.00 *
Dichtung Hand-Ventilator H-11 Seal for Hand-Blower H-11
  115 mm x 100 mm, thickness= 5mm
€4.80 *
Ersatz-Zahnräder für Hand-Ventilator H-11 (Kunststoff) set of toothed wheels for H-11
  (hand blower)consisting of three pieces(articles 62811022 + 62811023 + 62811024)
€44.00 *
Ersatz-Zahnrad Nr. 1 toothed wheel no. 1
  for H-11 (hand blower)steel shaft with plastic toothed wheel
€19.00 *
Ersatz-Zahnrad Nr. 2 toothed wheel no. 2
  for H-11 (hand blower)double plastic toothed wheel
€17.00 *
Ersatz-Zahnrad Nr. 3 aus Stahl toothed wheel no. 3
  for H-11 (hand blower)steel shaft with toothed wheel
€20.00 *
Ersatz-Zahnrad Nr. 1 aus Stahl toothed wheel no. 1 (steel)
  for H-11 (hand blower)steel shaft with steel toothed wheel
€34.00 *
Ersatz-Zahnrad Nr. 2 aus Stahl toothed wheel no. 2 (steel)
  for H-11 (hand blower)double toothed wheel
€35.00 *
Ersatz-Kurbel für Hand-Ventilator H-11 handle as a spare
for hand-blower type H-11with wooden grip
€20.00 *
Verlängerungskabel Schuko (230V/1-ph), 5 m Extension cable
  Splash-proof coupling and plug,For permanent use outdoors as well as on construction and assembly sites
From €28.80 *
Kugelhahn 1/4" Ball valve 1/4"
€14.80 *
Gas-Sicherheitsventil Gas safety valve
  Intake M 14x1,5, Outlet for 8 mm cutting ring,thermocouple M 8 x 1,pressure 50 mbar - 4 bar,thread at push button: M12x0,75
€36.00 *
Thermoelement Gasschmiedeofen Temperature receiving element for P-301/302
  750 mm, M8x1, CrNi-as a spare part
€21.00 *
Zündkerze für Brenner P-30x Spark plug for burner P-30x
  thread M14x1,25
€6.00 *
Piezotaster 18/26 mm piezo ignition button
  for fixation hole ø 18 mmconnection bullet receptacle ø2,4 mm,front dimension 26 mm
€11.00 *
Verbindungsstück AG GF x RST 10 mm connection AG GF x RST 10 mm
  male  (W21,8x1/14-LH) and pipe 10 mmfor the connection of regulators (GF) to gas pipelines
€9.50 *
58 From 61
Viewed