Due to legal requirements (Corona), direct sales on site in Reinstetten are not possible at the moment. - shipping by parcel service continues without problems.

Airhammer Kuhn

1 From 4
No results were found for the filter!
Vulkollan plate Vulkollan plate
  Dimension approx. 51 x 10 cm, thickness 5 mm
From €8.33 *
Vulkollen plate for 2000 K/CF22 Vulkollen plate for 2000 K/CF22
 
€169.00 *
Vulkollanplatte für 2000 K/CF 40 und 50 Vulkollen plate for 2000 K/CF 40 and 50
 
€202.30 *
Vulkollanplatte für Lufthammer Kuhn Typ K-0 Vulkollen plate for airhammer Kuhn type K-0
 
€190.00 *
Vulkollanplatte für KB 1 und K 23 Vulkollen plate for KB 1 and K 23
 
€190.00 *
Vulkollanplatte für 12/42 und K24/53 Vulkollen plate for airhammer Kuhn type 12/42...
€190.00 *
Keil für Gesenkbefestigung (bis 40 kg) wedge for die (air hammer Kuhn up to 40 kg)
 
€18.00 *
Keil für Gesenkbefestigung (ab 50 kg) wedge for die (air hammer Kuhn 50kg)
 
€26.37 *
Keilaustreiber Kuhn für Gesenke 22__ punch for wedges for air hammer Kuhn up to 40 kg
 
€99.00 *
Keilaustreiber Kuhn für Gesenke 24__ punch for wedges for air hammer Kuhn over 50 kg
 
€99.00 *
Satz Beilagen für Gesenkbefestigung (22..) set of shims for die (22..)
  for airhammer Kuhn up to 40 kg set of shims, 120x20 mm (1...8 mm)
€59.00 *
Satz Beilagen für Gesenkbefestigung (24..) set of shims for die (24..)
  for airhammer Kuhn >= 50 kg set of shims, 160x25 mm (1...8 mm)
€69.00 *
Flachgesenk Nr. 2200B Flat standard wide die for Kuhn
  no. 2200B for air hammer up to 40 kg ram weight, special steel with best abrasion resistance
From €270.00 *
Flachgesenk überbreit Nr. 2201B Flat extra wide die for Kuhn
  Dimension 95 x 58 x 80 mm for air hammer up to 40 kg ram weight, special steel with best abrasion resistance
From €298.00 *
Recksattel Nr. 2202B Convex drawing die for Kuhn
  no. 2202B, R= 75 mm for air hammer up to 40 kg ram weight, special steel with best abrasion resistance
From €379.00 *
Finne Nr. 2203B Narrow face (conic) for Kuhn
  no. 2203B, R=18 mm for air hammer up to 40 kg ram weight, special steel with best abrasion resistance
From €379.00 *
Schmiedesattel Nr. 2204B Round face forging for Kuhn
  no. 2204B, R=22,5 mm for air hammer up to 40 kg ram weight, special steel with best abrasion resistance
From €379.00 *
Recksattel konvex Nr. 2205B Sweep die (convex in length and width)
  no. 2205B, R=250/75 mm for air hammer up to 40 kg ram weight, special steel with best abrasion resistance
From €379.00 *
Ballengesenk Nr. 2206B Round convex faced die for Kuhn
  no. 2206B, D=40 mm, R=75 mm for air hammer up to 40 kg ram weight, special steel with best abrasion resistance
From €379.00 *
Kugelgesenk Nr. 2207B Round ball faced die
  no. 2207B, D=40 mm for air hammer up to 40 kg ram weight, special steel with best abrasion resistance
From €379.00 *
1 From 4
Viewed