working block
Featuring various working surfaces, milled and hardened from tool steel;
leveling surface, V-block, bending edges, forming grooves, dishing depressions,
boreholes, square mounting sockets (20 x 20 and 28 x 28);
Dimensions: 120 x 120 x 120 mm, 10 kg, burnished finish.
Back in Stock!
Features:
- Milled from tool steel
- Hardened for long service life
- Blackened (burnished) finish
- Compact dimensions
Working Surfaces:
- Flattening surface: 120 x 120 mm, flat
- 1x Square socket: 20 x 20 mm
- 1x Square socket: 28 x 28 mm
- Square sockets feature spring-loaded plates
- 90° V-groove (Prism): 20 mm deep
- Bending edge: Continuous
- Mounting hole: Ø 13 mm, 60 mm deep
- Swaging groove: R 20, 20 mm deep
- Forming groove: R 10, 10 mm deep
- Dishing depression: Ø 75 mm (R 55)
- Forming depressions: R 3, 6, 8, 10, 12, 14, 18 mm
- Holes: Ø 3, 4, 5, 6 mm — 15 mm deep
- Holes: Ø 13 mm — 50 mm deep
Compared to the older variant, this version is not cast, but rather milled from a solid block of tool steel. Subsequently, the part is hardened and blackened. This manufacturing process results in superior surface finish and hardness compared to the previous model.
Information on product safety:
- Use only for users familiar with the product.
- Only for the intended purpose.
- Improper use can lead to damage and injury. Please also note the safety instructions included with the product.
Importer/manufacturer/distributor (unless another manufacturer is explicitly mentioned for the article):
ANGELE GmbH | Ringstrasse 25 | 88416 Ochsenhausen | Germany
info@angele-shop.com
Information on product safety:
- Use only for users familiar with the product.
- Only for the intended purpose.
- Improper use can lead to damage and injury. Please also note the safety instructions included with the product.
Importer/manufacturer/distributor (unless another manufacturer is explicitly mentioned for the article):
ANGELE GmbH | Ringstrasse 25 | 88416 Ochsenhausen | Germany
info@angele-shop.com