Wet grinding system
Compact water-cooled grinding system for various tools 230 volts, 1ph, 50Hz, 150W, Adjustable speed Supplied complete with: Water tank Honing paste Angle guide Universal sharpening jig Fine-grain corundum grinding stone (Grit 220) Leather honing wheel Features: Adjustable speed (90–160 rpm) Grinding wheel reversible for clockwise and counter-clockwise rotation Precise sharpening results Fine-grain corundum grinding stone suitable for tools with a hardness exceeding 60 HRC Powerful induction motor for smooth, low-vibration operation Powder-coated steel housing Extensive range of accessories Shatterproof water tank Splash-proof motor and switch Removable leather honing wheel for removing burrs after sharpening Angle guide for setting the correct sharpening angle Extensive accessory system facilitates the application of proper sharpening techniques—even for beginners Durable sharpening results without loss of tool hardness due to heat buildup during the grinding process, thanks to low rotational speed and a cooling water bath Ø250 mm grinding stone diameter Ø200 mm honing wheel diameter This sharpening machine is ideal for both home hobbyists and professionals alike. It offers outstanding quality and enables the quick, safe sharpening of knives, scissors, lawnmower blades, and chisels. Thanks to the comprehensive jig system, you can sharpen almost any cutting tool to a level of precision that exceeds its original factory condition. The universal support arm ensures precise repeatability, while the leather honing wheel delivers razor-sharp results. The compact design of this sharpening machine ensures high stability, and the universal support arm serves as the guide for all jigs and accessories, thereby enabling unbeatable precision.
Devices for sharpening many common household tools, for a precise grinding result. Delivery complete with: For knives with a blade length of 100 to 200 mm For axes with a blade length of up to 170 mm For straight scissors and hedge trimmers
Device for tubes and gouge, universal sanding support, stone preparator, for a precise grinding result. Characteristics: Practical set for sharpening turning knives Sharpening attachment allows for easy sharpening of bevel blades, gouges and plane irons Stone grader to increase the grit for particularly fine grinding with one side and roughen it again with the other side
Holding device for knives with a blade length of at least 40 to 100 mm and draw gauge
Holding device for knives with a blade length of at least 100 to 200 mm and draw gauge
Holding device for axes with a cutting edge length of up to 170 mm
Holding device for straight scissors and hedge trimmers
Holding device for oblique cutting, tubes and plane iron
For dressing abrasive stones with ultra-hard dressing diamonds
Practical holding device for many straight standard tools
Extension to Universal sander USV-NSS, For tools that can not be easily clamped.
for planer knives up to approx. 400 mm in length Characteristics: Can be used variably for different blade widths Precise, smooth-running and maintenance-free plain bearing guide, hard-anodized Fine adjustment for grinding angle Maximum grinding length 400 mm
Characteristics: For clamping chisels and parting tools Ideally suited for sharpening using the tool rest (available as an accessory) Gentle clamping of tools thanks to a brass insert on the clamping surface Accommodates tools up to 50 mm in width
Characteristics: For sharpening all gouges, tubes, and other tools with complex shapes—such as skew chisels and carbide turning tools The jig can be adjusted to match the shape of the tool, allowing for the creation of a uniform bevel even on rounded cutting edges Compatible with various tool rests on woodturning lathes, enabling turning gouges to be sharpened directly on the machine Also perfectly suited for use with the NTS wet grinding system
To increase the grain for particularly fine cuts with one side, To roughen again with the other side.
Leather honing disc Ø100 profiled for NTS For removing the insides of rotating tubes and goat feet, Diameter 100 mm.
for removing grinding burrs after sharpening, Diameter 200mm
Angle gauge for grindstone Ø250mm to determine the right grinding angle for your tools, for use with sharpening stones with a diameter of 250 mm