Filling nipple (FN), M 10 x 1 male 400 g grease cartridge, DIN 1284, grease filling system or loose grease using a spatula   The grease gun for eternity!   Specification Filling nipple (FN), M 10 x 1 male Polybag, with headcard, for hanging display High pressure hose, M 10 x 1 male, 11 x 300 mm, with 4-claws-coupler, M 10 x 1 female   Special notes Operates with greases up to NLGI grade 2 at 20°C Plunger with exactly fitting when using bulk grease or cartridge Due to the flexibility of the push rod, the plunger can be inserted into damaged cartridges or cartridges not exactly matching the standard dimensions acc. to DIN 1283 TÜV - certified Pump piston, cylinder and O-ring with 6 μ fit (no dummy lubrication) No dummy (apparent) lubrication. Sealing system: O-ring and ball valve prevent grease compressed in the grease gun head from feeding back. Performance unchanged after 40.000 actuating cycles Separate filling and ventilation valves on grease gun head Grease gun head, zinc die casting Z 410 Sure grip handling due to deep band knurls Safe handle on the push rod Slip resistant handle on grease gun lever Enables even under extreme backpressure, a variable lubrication pressure with steady effort applied Allows lubrication in difficult to reach locations because the smallest lever operation results in grease being pumped reliably to the lubrication point. Plunger rod clamp on end cap enables manual pressure to be applied to spring to compress bulk grease, or to force in the plunger in damaged cartridges. Push rod can be locked in any position - push rod does not have to be fully retracted to release the spring pressure on the grease (grease does not saponify) High-speed ventilation, by half a rotation of the grease gun tube

  casing made of aluminium, foot switch-cover prevents unintentional operation, for forging press with one speed level.

  casing made of aluminium, foot switch-cover prevents unintentional operation, for forging press with two speed levels.

  0-400 bar (0-40 MPa)

    Chief cause of damage and malfunction of hydraulic machines is polluted oil. The oil filter ensures that the hydraulic system (pump, valves, pipes) remains free of dirt particles and prevents damage. Replacing the oil filter and hydraulic oil regular ensures a long life and high performance of the system.

    Chief cause of damage and malfunction of hydraulic machines is polluted oil. The oil filter ensures that the hydraulic system (pump, valves, pipes) remains free of dirt particles and prevents damage. Replacing the oil filter and hydraulic oil regular ensures a long life and high performance of the system.

  with integrated temperature gauge   Chief cause of damage and malfunction of hydraulic machines is polluted oil. The oil filter ensures that the hydraulic system (pump, valves, pipes) remains free of dirt particles and prevents damage. Replacing the oil filter and hydraulic oil regular ensures a long life and high performance of the system.

  Length of the sensor approx. 65 mm, Diameter of the sensor approx. 12 mm

  approx. 45x220x15 mm

  approx. 50x260x15 mm

Oil filler filter for forging press AN-Y04

  spacer/ring for elastic coupling, for coupling between hydraulic pump and electric motor   This part should be replaced regularly, depending on wear to avoid damage of the electric motor and hydraulic pump.

  spacer/ring for elastic coupling, for coupling between hydraulic pump and electric motor   This part should be replaced regularly, depending on wear to avoid damage of the electric motor and hydraulic pump.

  wrench size 75 mm, with cross holes for using a lever, for changing the guide block

  wrench size 120 mm, with cross holes for using a lever, for changing the guide block

  Axial piston pump, suitable for hydraulic forging press AN-Y04-25t

  for forgingpress AN-Y04 AN-Y04-25t requires 220-240 l, AN-Y04-50t requires 450-500 l   packing unit in barrels with 60 l   Properties:   Enhanced aging resistance Enhanced corrosion protection Enhanced EP properties (extreme pressure and wear protection)   Thanks to its additive package, this oil meets all the requirements of forging presses and is primarily suitable for hydraulic systems subject to high thermal stress, where water ingress may lead to corrosion, and whose pumps or hydraulic motors—due to operating conditions—require oils offering wear protection under mixed-friction regimes.     A frequent cause of damage and malfunctions in hydraulic machinery is contaminated oil. Replacing the oil filter and hydraulic fluid at regular intervals ensures a long service life and consistent system performance.

  AN-Y04-25t/50t, for lubrication of slideways, for dusty and damp conditions, cartridge with 400g