Skip to main content Skip to search Skip to main navigation
Menu

Forging

Flames, heat, clanging anvils
and the smell of coal...

One ​​of the oldest and most beautiful crafts.

Casting

Earth - Fire - Metal
these are the elements of casting...

here you will also find the right tools.


and much more...

Blacksmithing courses, books,...
everything about blacksmithing and casting.

And that since 1948 in the third generation of the family.


Skip product gallery
Ball Hammer
00545183
Ball hammer #Varinfo hand-forged, made of tool steel Head length approx. 140 mm, convex side approx. Ø 30 mm, slightly convex side approx. 30x30 mm, Total length approx. 350 mm   Features: Made of high-quality tool steel Hand-forged Carefully hardened and tempered Grounded Ergonomic head shape Ergonomic hammer handle One side rounded - convex One side square - slightly convex   These special tools are hand-forged to the highest quality standards at the Reisinger forge in the heart of the Lower Mühlviertel region of Austria.   ...and for those who would like to learn more about Peter Reisinger and his family business, further information can be found in the "Manufacturer" tab.

From €139.00*
Ball swage concave
00517135
  forged of tool steel, diameter #Varinfo shaft approx. 25x25 mm, for fixation in the anvil.   other diameters on request

From €75.01*
Ball swage convex
00517130
  forged of tool steel, diameter #Varinfo shaft approx. 25x25 mm, for fixation in the anvil.   other diameters on request

From €94.00*
Diagonal Punch for square hole
00518724
  handforged from high quality steel W303, forged diagonal, smoothed and polished by hand   Features: Forged from hot-work steel Oil-hardened and tempered Ground and polished Special geometry   These special tools are forged in the Reisinger forge in the heart of the lower Mühlviertel in Austria according to the highest quality standards.   ...and if you want to learn more about Peter Reisinger and his family business, you can find more information in the "Manufacturer" tab.

From €57.00*
Hole split chisel
00518712
  forged of quality hot work steel W303, hardened and tempered, sharpened and polished, length about 220 mm, width of cutting edge ~ 20 mm, for holes XXxXX mm or ØXX mm   Features: Forged from hot-work steel Oil-hardened and tempered Ground and polished Special geometry   These special tools are forged in the Reisinger forge in the heart of the lower Mühlviertel in Austria according to the highest quality standards.   ...and if you want to learn more about Peter Reisinger and his family business, you can find more information in the "Manufacturer" tab.

From €63.00*
Punch for axes
00518728
  forged of quality hot work steel, smoothed, length about 490 mm, for punching holes according to DIN.   Properties: Forged from hot-work steel Oil-hardened and tempered Ground and polished Long service life Very good heat resistance     This forged tool enables simple punching and thorning of blanks according to DIN. The thorn is forged and ground in such a way that the different "eye measurements" of the axe head are reflected on the different lengths of the thorn. This makes it easy to thorn and you get the desired eye measurement to match the standard axe handles with great repeatability.   These special tools are forged by hand in the Reisinger forge in the heart of the lower Mühlviertel in Austria according to the highest quality standards.   ...and anyone who wants to learn more about Peter Reisinger and his family business can find further information in the "Manufacturers" tab.

€238.00*
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
pcs
Punch for hammers
00518726
  forged of quality hot work steel, smoothed, length about 280 mm, for punching holes according to DIN.   Properties: Forged from hot-work steel Oil-hardened and tempered Ground and polished Long service life Very good heat resistance   This forged tool enables easy punching and thorning of blanks according to DIN. The thorn is forged and ground in such a way that the different "eye measurements" of the hammer head are reflected on the different lengths of the thorn. This makes thorning easy and you get the desired eye measurement to match the hammer handles with great repeatability.   Figure 2 shows the hammer thorn and a hammer blank forged with it. The hammer blank is not included in the scope of delivery.   These special tools are forged by hand in the Reisinger forge in the heart of the lower Mühlviertel in Austria to the highest quality standards.   ...and anyone who wants to learn more about Peter Reisinger and his family business can find further information in the "Manufacturers" tab.

€165.01*
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
pcs
Punch for hatchets
00518727
  forged of quality hot work steel, smoothed, length about 450 mm, for punching holes according to DIN.   Properties: Forged from hot-work steel Oil-hardened and tempered Ground and polished Long service life Very good heat resistance   This forged tool enables simple punching and thorning of blanks in accordance with DIN. The thorn is forged and ground in such a way that the different "eye measurements" of the axe head are reflected on the different lengths of the thorn. This makes it easy to thorn and you get the desired eye measurement to match the standard axe handles with great repeatability.   These special tools are forged by hand in the Reisinger forge in the heart of the lower Mühlviertel in Austria to the highest quality standards.   ...and anyone who wants to learn more about Peter Reisinger and his family business can find further information in the "Manufacturers" tab.

€175.00*
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
pcs
Punch for square holes
00518722
  handforged from high quality steel, forged, smoothed and polished by hand, Length approx. 120 mm   Features: Forged from hot-work steel Oil-hardened and tempered Ground and polished Special geometry     These special tools are forged in the Reisinger forge in the heart of the lower Mühlviertel in Austria according to the highest quality standards.   ...and if you want to learn more about Peter Reisinger and his family business, you can find more information in the "Manufacturer" tab.

From €40.00*
Punch round
00518716
  forged of quality hot work steel, hardened and tempered, sharpened and polished, length about 220 mm, for holes X mm   Features: Forged from hot-work steel Oil-hardened and tempered Ground and polished Special geometry   These special tools are forged in the Reisinger forge in the heart of the lower Mühlviertel in Austria according to the highest quality standards.   ...and if you want to learn more about Peter Reisinger and his family business, you can find more information in the "Manufacturer" tab.

From €57.00*
Punch square
00518714
  forged of quality hot work steel W303, hardened and tempered, sharpened and polished, length about 220 mm, for square holes XxX mm   Features: Forged from hot-work steel Oil-hardened and tempered Ground and polished Special geometry   These special tools are forged in the Reisinger forge in the heart of the lower Mühlviertel in Austria according to the highest quality standards.   ...and if you want to learn more about Peter Reisinger and his family business, you can find more information in the "Manufacturer" tab.

From €57.00*
Punch universal round
00518720
  forged of quality hot work steel, smoothed, length about 200 mm, Diameter approx. 12 - 32 mm   Features: Forged from hot-work steel Ground and polished Special geometry For drilling round holes Long service life thanks to high-quality tool steel     These special tools are forged in the Reisinger forge in the heart of the lower Mühlviertel in Austria according to the highest quality standards.   ...and if you want to learn more about Peter Reisinger and his family business, you can find more information in the "Manufacturer" tab.

€90.00*
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
pcs
Punch universal square
00518718
  forged of quality hot work steel, smoothed, length about 200 mm, square approx. 10x10 - 30x30 mm   Features: Forged from hot-work steel Ground and polished Special geometry For drilling square holes Long service life thanks to high-quality tool steel     These special tools are forged in the Reisinger forge in the heart of the lower Mühlviertel in Austria according to the highest quality standards.   ...and if you want to learn more about Peter Reisinger and his family business, you can find more information in the "Manufacturer" tab.

€90.00*
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
pcs
raw piece for hammers
00518740
  forged from C45, punched,  Surface untreated, not hardened, approx. XX x XX x XX mm, Size of hammer-eye ca. XX x XX mm   This forged blank is ideal for forging your own hammers. The raw piece for hammers is perforated and thorned perfectly according to DIN and after grinding or forging only has to be hardened according to your own ideas. (hardening instructions in the download area). Depending on the processing, it may happen that the eye has to be thorned again after forging. For this we recommend our hammer thorn (item no. 518726) These special tools are forged by hand in the Reisinger forge in the heart of the lower Mühlviertel in Austria to the highest quality standards.   ...and anyone who wants to learn more about Peter Reisinger and his family business can find further information in the "Manufacturers" tab.   A photo shows the different sizes in an overview.

From €33.00*
Riveting iron 4-14 mm
00518707
  Forged from tool steel, approx. 420 x 40 x 40 mm (LxWxH), Round holes 4, 5, 6, 8, 10,12, 14 mm, chamfered on one side, hardened and tempered   Ideal for producing rivets in smaller batches. This tool allows you to produce various rivet sizes and lengths cleanly and accurately. It can also be used to produce ball studs.   Features: forged of tool steel Hardened and tempered Precisely machined holes No jamming of rivets   Always cool the tool thoroughly during use and do not allow it to overheat.     These special tools are forged in the Reisinger forge in the heart of the lower Mühlviertel in Austria according to the highest quality standards.   ...and if you want to learn more about Peter Reisinger and his family business, you can find more information in the "Manufacturer" tab.

€132.90*
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
pcs
round stake plate 4-12 mm
00518705
  forged of quality tool steel, approx. 400 x 34 x 20 mm (LxWxH), with holes Ø 4, 5, 6, 8, 10,12 mm, one side counterbored, one side beveled, hardened and tempered   Features: Made of tool steel Hardened and tempered Forged handle Precisely machined holes One side countersunk One side chamfered   These special tools are forged in the Reisinger forge in the heart of the lower Mühlviertel in Austria according to the highest quality standards.   ...and if you want to learn more about Peter Reisinger and his family business, you can find more information in the "Manufacturer" tab.

€142.00*
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
pcs
Split chisel
00518710
  forged of quality hot work steel W303, hardened and tempered, sharpened and polished, length about 220 mm, width of cutting edge ca. XX mm   Features: Forged from hot-work steel Oil-hardened and tempered Ground and polished Special geometry   These special tools are forged in the Reisinger forge in the heart of the lower Mühlviertel in Austria according to the highest quality standards.   ...and if you want to learn more about Peter Reisinger and his family business, you can find more information in the "Manufacturer" tab.

From €68.00*
Square stake plate 5-12 mm
00518706
  forged of quality tool steel, approx. 400 x 34 x 20 mm (LxWxH), with square holes 5, 6, 8, 10,12 mm, one side beveled, hardened and tempered   Features: Made of tool steel Hardened and tempered Forged handle Precisely machined holes One side countersunk One side chamfered   These special tools are forged in the Reisinger forge in the heart of the lower Mühlviertel in Austria according to the highest quality standards.   ...and if you want to learn more about Peter Reisinger and his family business, you can find more information in the "Manufacturer" tab.

€161.99*
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
pcs

Free delivery
Coke and coal*

*Valid until April 21, 2025
You will receive the discount when you enter the discount code in your shopping cart.

Promotion code:
Koksen25


% Ball Hammer %

  • hand-forged
  • made of high-quality tool steel
  • carefully hardened and tempered

This ball hammer is hand-forged in the Reisinger forge in the heart of the Lower Mühlviertel region of Austria, according to the highest quality standards.

!!!NEW in our range!!!

Introductory price

14.75 %
hardening oil, 5 liter
00621305
  DURIXOL W 25 Evaporation resistant and thermochemically stable universal hardening oil.     Characteristics: regulated deterrent behavior high resistance to evaporation high oxidation resistance high thermal stability very good aging resistance low evaporation losses Operating range 50-150 °C Flash point 228°C   Ideal for quenching warp-sensitive and difficult-to-form components made of low-alloy and unalloyed case-hardened and heat-treated steels as well as high-alloy tool steels.   Ideal for knife blades, hammers, tools and much more...   Bath temperature 50-150 °C (inert gas cover recommended from 100 °C), resulting in mild cooling in the critical martensite area.

Content: 5 Liter (€10.40* / 1 Liter)

€52.00* €61.00*
Tip
Pantarol® A metal protection (outdoor) 0,4 l (Spray)
00622164.04
Pantarol® A metal protection (outdoor)  0,4 l (Spray) colorless, pigment-free anti-corrosion paint based on polyacrylate for weather-resistant, high-gloss protective coatings on metal surfaces (especially for non-ferrous metals).   In order to ensure an elastic metal protective surface outdoors, Pantarol® A uses a resin that can follow the temperature movements of metals and is also UV stable.   Pretreatment: A prerequisite for building up a permanent protective film is a grease, oil and dust-free, shiny metallic surface.   Processing: Apply by brushing or spraying under the following conditions: Painting: The product is ready to brush Spraying: Prepare ready to spray with “Thinner for Pantarol® A” No. 131 in a ratio of 2 parts paint and 1 part thinner. Recommended spray viscosity: 15 sec/4 mm DIN (20 °C); at approx. 3-4 bar pressure with a 0.8-1 mm nozzle. Rollers: An additive is required for roller application to prevent threads from pulling.   Clean the tools immediately after use with “Thinner for Pantarol® A” No. 131.   Drying: Air drying: at 15 - 25°C Dust dry after approx. 15 minutes, hand dry after approx. 30 - 45 Completely dry after approx. 24 hours Oven drying: Completely dry after approx. 1 - 2 hours at elevated temperature (40 - 60°C; up to max. 100°C)   Yield: If the processing recommendations are followed, approx. 8-12 m² of treatment area per liter.

Content: 0.4 Liter (€74.50* / 1 Liter)

€29.80*
blacksmith's hammer 1.25 kg "Krenzer"
00541013
  short german shape, with ash handle head dimension approx. 110 x 45 x 40 mm length approx. 280 mm   Blacksmith's hammer 1,25 kg is the ideal standard hammer. The weight of the head is a good mean. The ash handle fits comfortably in your hand.   Properties: free-form forged made from tool steel reliably hardened according to DIN black painted hammer head unpainted handle   These forging hammers are individually free form forged in the "Krenzerhammer", which is the last historical tool factory in the valley of the Ennepe (Germany).

€33.00*
15.38 %
Marker for drill holes Duo
00617165
    · Permanent marker and Marker for drill holes combined in one pen · Marker for drill holes tip: extra long (25 mm), thin stainless steel tip with Ø 2 mm for marking drill holes and hard-to-reach areas · Special shaped tip avoids slipping into the steel barrel · Permanent marker tip: round tip 1.5 – 3 mm for marking and writing on almost any material, for example plastic, carton, metal, glass, rubber, wood… · Fadeless, quick drying and waterproof on almost any surfaces · Low smell ink without Xylene / Toluene

€3.30* €3.90*
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
pcs
portable forge type F 600 H
00116020
  hand operated for solid fuel (coal), cast iron fire pan 220 x 200 mm, table top 600 x 500 x 4 mm, height 800 mm, handblower with gear train with handle, complete with hearth sole with cast iron fire pan  (inner top dim. 215 x 195 mm), with ash-cleaner, bow for suspension of tools   Properties: Self-sufficient operation without electricity can be used anywhere quick, easy to set up finely adjustable air regulation easy cleaning thanks to ash flap stable, robust design durable components very quiet blower (industrial fan) cast fire pan suitable for hobby, professional, schools, private,...

€650.00*
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
pcs
Digital Thermometer
00159014
  up to 1370°C (2498 °F), for 2 pieces of temperature sensor type K   Delivery includes protective cover, 2 pieces of sensors up to 250 °C, Sensors up to 1200°C available as accessories.   This thermometer allows to work with two sensors at the same time and reliably measure temperatures up to a maximum of 1370 °C. This means that the temperature in the oven and in the workpiece can be measured at the same time.   Technical data:   2 sensor slots for "Type K" sensor Measuring range: -200°C....1370°C, resolution: 0.1°C Accuracy: 0.1±0.4°C Various functions: temperature measurement, max./min., average value, hold function Display: LCD Operating temperature range: -10°C...50°C Dimensions approx. 158 x 75 x 41 mm Unit adjustable °C or °F or K 9V block battery with folding base for setting up

€61.00*
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
pcs
Tip
scale brush
00550111
  scale-brush, with wooden handle, solid model with 30 mm stiff bristles, dimensions 235x95 mm   This solid scales-brush is designed for heavy usage in forges and also removes stubborn scale. robust brush body made of wood sturdy wooden handle wear-resistant flat wire bristles

€31.00*
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
pcs
AN-25 L airhammer
00667022
  ram weight 25 kg hit energy 0.27 kJ, horiz. clearance 235 mm, free height of working area 240 mm, number of strokes 250 strokes/min, electric power 3,0 kW, three-phase 3 x 400 Volt, total weight 1040 kg, length x width x height: 1470 x 740 x 1835 mm equipped with 2 combination dies (top/bottom), with motor-protection-switch and emergency-stop, mounted on steel base.   serial no. #N New / revised series of airhammers: No insertion of the dies into the bear -> enables the installation of extra wide dies increased projection of the C-frame -> larger working area Higher anvil weight -> larger counterweight to the bear

€10,900.00*
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
pcs
Hooked: A Blacksmith’s Study of Function Through Form
00961638
Hooked: A Blacksmith’s Study of Function Through Form by Matt Jenkins What began as a personal journey to escape a creative rut evolved into a year-long exploration of tools, techniques, and skills.   Inside the book, you will find: 187 pages, 366 hook images 24- step by step drawings Background stories for important hooks, lessons learned in the shop, tips and tricks.   Hooked: A Blacksmith’s Study of Function Through Form is not just a book; it’s a source of inspiration. Part coffee table book, part step-by-step guide, and part design motivation, it chronicles Matt Jenkins' 2016 #366Hooks project, in which he challenged himself to design and forge a different hook each day of the (leap) year. The result?   366 unique hooks, each a spark of creativity, distinct in style, shape, and process.   Each hook in this book tells a story—crafted from off-cuts of custom railings, inspired by motifs observed while traveling, incorporating tricks learned from many mentors, and marking special occasions. Individually, these hooks are intriguing; together in one book, they become mesmerizing.

€49.90*
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
pcs

Hot Ovens

with our Italian partner company, we have added new ovens to our range that heat up quickly and reliably to up to 1200 °C. Perfect for heating knife blades or smaller forging works, but also for hardening and tempering...

Books Books Books

Anyone who can read has a clear advantage...

In addition to standard works, we also offer out-of-print rarities or books from abroad 


About us

We are a family business with 10 employees in the heart of Swabian,
we supply almost everything for forging and casting, menwhile in the third generation.